The Basics Of Wireless Home Alarm Systems – DIY


It is amazing when you develop a little bit of confidence how you can tackle wireless home alarm systems do it yourself projects and not be intimidated. The more you research, the more you can learn the basic concepts and then be ready to tackle this project successfully and save quite a bit of money in the process!

First, keep in mind the main elements that you will be using for your new wireless do it yourself home alarm system. They include: sensors, a siren, a keypad, and the brains of the operation – the control panel. It is best to place the control panel in a hidden location with easy access where everyone in the home will know where it is located. All the main processes will be worked through this equipment, so make sure Fido or any little kids cannot find it and knock it to the floor or play with the controls.

DIY home alarm system kit Keypads should be installed at the most convenient entrance or exit of the home. Most people also add them to locations close to a bedroom, in case they need quick access during the middle of the night to disarm or arm the system.

When it comes to installing the siren of your do it yourself home alarm system, it is best to first take a walk outdoors to determine the best place to install the siren. There are a couple of thoughts as to how this should be positioned. Some people prefer to hide the siren amongst the landscaping because, let’s face it, it is not very decorative. Others think the siren should be put in a very obvious location, to let everyone know there is an alarm system present in your home. The choice is really a personal one to make.

To install your home alarm system, install sensors on all windows and doors. The access door should have a delay door sensor so you can set the alarm from inside but have a few seconds to get out before the alarm activates. Passive infrared sensors can also be installed in all rooms if you want. Program your user code into the keypad and then test that the alarm system is operating properly. You should also periodically test sensors to verify they are working and setting off the alarm.

There are additional features you can install with your do it yourself wireless home alarm system. One in particular to consider is the panic button, which dials any emergency number you program instantly or sets off the alarm at the touch of the button. Many people install the panic button in their bedroom, so if they hear noises in the middle of the night that makes them suspect there is an intruder, they can set off the alarm and hopefully scare the intruder away before they would make their way to the bedroom. There are other features you can consider as well, such as electronic eyes, remote keypads and even outdoor wireless security cameras, so you can see what’s going on before someone even makes it into your home.

Wireless home alarm systems do it yourself projects are not for everyone, but if you have a little knowledge, confidence in your abilities, and have some patience to follow the included instructions, it is certainly something that can be done. And the biggest benefit is that a do it yourself home alarm system can save you a lot of money over hiring a professional alarm company to do it for you!


Written by 

Leave a Reply

Your email address will not be published. Required fields are marked *